Powerline
Deep marking ✓ Pneumatic dot peen markers of the Powerline series
Marking fields 100 x 100 | 200 x 150 mm
Powerline
Features
- Robust pneumatic dot peen marker
- Labelling fields: 65 x 35 | 100 x 35 | 180 x 35 mm
- Larger title blocks on request up to 500 x 300 mm
-
Satisfied Powerline customers worldwide ✓
On the market for over 50 years! - Simple operation via external control | No PC necessary
- ALL-IN-ONE dot peen marker mobile & stationary
- Best marking quality! For metals, plastics & wood products
- Ultra deep marking up to 1 mm in steel
- Easy integration into production lines
- High quality for many years of use under the toughest production conditions
Powerline dot peen marker for particularly deep markings!
Powerline | Quality
The dot peen markers of the Powerline series convince with their robust construction and unique quality. They are equipped with high-quality components such as Schneeberger linear guides and Kevlar toothed belts. This enables an impressive typeface and ensures years of carefree marking.
Even under the toughest production conditions of dust and dirt, the dot peen markers can be used in production-relevant areas.
Powerline | Design
Some dot peen markers of the Powerline series can be used both mobile and stationary. The devices differ only in the lettering field and the size. The wide range of models means that the right device is available for almost every application, both for small and large-area markings!
With the comfortable handle, the Powerline dot peen markers become mobile devices in no time at all, while the height-adjustable column allows stationary marking. The integration of the dot peen markers is made easy by intelligent interfaces.
- Powerline title blocks from 65 x 35 to 180 x 35 mm
- On request title block up to 500 x 300 mm!
- ALL-IN-ONE mobile and stationary
- Easy integration into production lines
Powerline dot peen marker – no compromises
Powerline dot peen marker
Due to the robust construction of the Powerline dot peen markers and the use of compressed air, extremely deep markings of up to 1 mm can be produced in steel. This makes it possible to mark your components before surface treatment such as painting or coating. Legibility is guaranteed afterwards and for the entire life cycle. Your components are therefore marked securely and permanently!
- Pneumatic dot peen marker
- Extremely deep marking up to 1 mm in steel
- Traceable over the entire life cycle
Model comparison
| Feature | P1 | P2 | P3 | F1 | F2 | F3 | FMAX |
|---|---|---|---|---|---|---|---|
| Labelling field | 65 x 35 mm | 100 x 35 mm | 180 x 35 mm | 65 x 65 mm | 100 x 100 mm | 180 x 100 mm | 500 x 300 mm |
| Weight | 2,1 kg | 2,4 kg | 4,5 kg | 3 kg | 4,5 kg | 5,5 kg | 12,5 kg |
| Materials | Metals, plastics, wood products, leather | ||||||
| Operation | External control BRAIN, Windows software | ||||||
| Use | mobile & stationary | stationary | |||||
Over 30 years of marking experience
Free technical advice at any time
Fast support
within 24 hours
Personal contact person in the company
Application areas | Powerline
The Powerline dot peen markers are equipped with a high-quality solid carbide needle. This can be used to mark both hard and soft materials. The marking of hardened steel or cast surfaces are standard tasks for the Powerline dot peen markers.
Due to the detailed adjustment possibilities, both fine and deep markings can be produced. This enables marking before and after surface treatment and ensures a unique typeface.
- Wood products
- Plastics
- Casting surfaces
- Lacquered or coated surfaces
- Metals such as aluminium, steel, hardened steel, etc.
All materials without needle exchange!
GEOMETRIES
The Powerline dot peen markers have a unique height compensation of the marking needle. Due to its length and the use of compressed air, it can compensate for unevenness of up to 14mm. This means that not only flat components but also cylindrical components or components with recesses can be marked.
- Flat or cylindrical
- Up to 14 mm height compensation for uneven surfaces
- In recesses or with interfering contours
- From the smallest component up to the largest
One device for multiple applications | Powerline dot peen marker
Operation | Powerline
The Powerline dot peen markers are supplied with their intelligent external BRAIN control. The user interface is simply designed and requires hardly any training time or prior knowledge. No PC is required, so the Powerline dot peen markers are completely self-sufficient and can be used anywhere. The electronics are not located directly on the marking head and are therefore not exposed to vibrations.
The Powerline control Brain has a wide range of interfaces and functions. The marking of simple texts, automatic serial numbers or DataMatrix codes are standard applications.
- Einfache & schnelle Easy & fast programming via external controlProgrammierung über externe Steuerung
- Texts, round type, logos, DataMatrix, QR Code
- Calendar - or series marking
- Entering the marking data by scanning a barcode
- Entering the marking data by reading in a CSV file
- Interfaces USB, WiFi, RS232, RS485, LAN
- Windows software if required
Powerline | Accessories
The optional accessories for the Powerline series simplify some marking tasks for you. The magnetic feet, for example, fix the marking head in place for deep marking in steel, while the height-adjustable column ensures that the Powerline models can be used stationary for marking smaller components.
- Magnetic feet for magnetic components
- Handle for mobile use
- Height-adjustable column for stationary use
- Automated Z-axis (column)
- Automated rotary axis
FAQ
We would be happy to present the Powerline series at your premises or create free sample lettering on your components.
The robust construction and the use of high-quality materials clearly set the Powerline series apart from other dot peen markers. This is reflected in the durability and the unique marking quality.
The Brain control unit included in the scope of delivery and free Windows software are available for programming.
The delivery time is approx. 1-2 working weeks.
You are not sure whether a corresponding marking is suitable for your component?
Then use our free sample labelling service. We will create the desired marking directly on your components!
