Marking laser Precision MS M
Flexible laser marking system for marking nearly all materials ✓
Precision MS M
Features
- High-performance marking laser from 10 - 60 W
- Cost-effective marking laser as stand-alone or tabletop system
- 100 x 100 mm labelling field, individual on request
- Precise & repeatable marking with Ytterbium fibre laser or UV laser for metals & plastics
- Optionally with CO2 laser for high-quality marking of wood, paper & leather
- Easy operation & short set-up due to focus finder
- 100% Safe | Laser Protection Class 1
- HighQuality made in Germany ✓ robust & reliable | 100,000 maintenance-free working hours
Quality | Precision MS
The quality of our laser marking systems is our top priority. By using the highest quality components and German quality standards, you will benefit from process-safe and accurate marking of your components for years to come. The quick set-up and simple operation make your employees’ everyday work easier and this with a low investment at the same time ✓.
Convince yourself and arrange a free demonstration appointment or send us samples for labelling!
Design | Precision MS M
Our Precision MS M laser marking system can be supplied both as a table system and as a stand-alone system. This allows the use as a sitting but also as a standing workstation. The cabin is slightly larger than that of the Precision MS S and thus also enables the marking of larger components.
- Standard labelling field 100 x 100 mm, larger on request
- Cabin size 780 x 640 x 880 mm
- Optionally as tabletop laser or stand-alone system
- Safe & reliable with laser protection class 1
- Up to 100,000 maintenance-free laser working hours
Precision MS M simply flexible!
Precision MS M | Setup
The Precision MS M laser marking system is supplied with a T-slot plate in the workspace. This allows a quick set-up and a quick change of different fixture systems. This reduces the setup effort for recurring markings as much as possible. The use of a focus finder makes it easier for your staff to set up the laser focus!
- Quick positioning of components due to T-slot plate
- Ultra fast height adjustment through focus finder
- Storable height adjustment (with automatic Z-axis)
- Predefined parameters for different materials
- Marking preview through positioning laser
- Customised positioning systems on request
Model comparison
| Feature | Precision MS S | Precision MS M | Precision MS XL |
|---|---|---|---|
| Labelling field | Standard 100 x 100 On request up to 150 x 150 mm | Standard 100 x 100 On request up to 150 x 150 mm | Standard 100 x 100 On request up to 565 x 565 mm |
| Laser source | Fibre laser Ytterbium 10 – 30 Watt | Fibre laser Ytterbium 10 – 60 Watt CO2 Laser 10 & 30 Watt UV Laser 1 – 20 Watt | Fibre laser Ytterbium 10 – 60 Watt CO2 Laser 10 & 30 Watt UV Laser 1 – 20 Watt |
| Options | Automatic height axis Rotary axis | Automatic height axis Automatic door Rotary axis 3D system | Automatic height axis Automatic door Rotary axis 3D system X/Y table Rotary table |
| Design | Table system without substructure | Table system without substructure or Stand alone with substructure | Stand Alone |
| Cabin size | 640 x 450 x 570 mm | 780 x 640 x 880 mm | individual |
| Operation | Windows Software | ||
| Materials | Metals & Plastics | Metals, plastics, wood, paper, leather | |
Fast support
within 24 hours
Laser marking systems made in Germany
Free technical advice at any time
Personal contact person in the company
Application areas | Precision MS M
As the marking lasers are manufactured by us in our own German production, you have a choice of different laser sources and strengths. Metals and plastics as well as organic materials such as wood or leather can be captively marked. You have the choice between a Ytterbium fibre laser, Co2 or UV laser.
- Ytterbium fibre laser source: 10 - 60 Watt for metals & plastics
- CO2 laser source: 10 W & 30 Watt for wood, paper, leather
- UV laser source: 1 - 20 Watt for plastics
- Painted & Coated Surfaces | Fine & Deep Marking
- Tempering & Engraving, Light & Dark
GEOMETRIES
With the Precision MS M laser marking system, small as well as larger components can be marked safely and quickly. Due to the larger cabin, the marking laser is suitable for a wide variety of areas, whether flat or cylindrical workpieces, uneven surfaces or components with interfering contours, with the Precision MS M you can mark almost all geometries without any problems.
- Flat or cylindrical
- In recesses or with interfering contours
- Primarily for smaller components, maximum component size depends on the labelling field used.
Precision MS M | Operation
The Precision MS M marking laser is operated via simple Windows software. It is so clearly designed that your employees hardly need any training time.
Predefined parameters for different materials simplify the setup of your marking jobs. Setting up texts, logos, serial numbers and even 2D codes is quick and easy.
- Easy & fast programming via Windows software
- Texts, round type, logos, DataMatrix, QR Code
- Calendar - or series marking
- Entering the marking data by scanning a barcode
- Entering the marking data by reading in a CSV file
- Interfaces USB, I/O
- Free Windows Software
Accessories | Precision MS M
Our Precision MS M laser marking system can be upgraded with several options. These include, for example, the software-controlled height axis and automatic safety door for even faster set-up, as well as a 3D system for processing uneven surfaces.
- 2D code reading systems
- Customised fixture systems
- Automatic security door
- Automatic height axis and rotary axis
- 3D system for machining uneven surfaces
All our marking lasers can be individually adapted to your requirements. We will be happy to design the right laser marking system for your application. Please contact us!
FAQ
We would be happy to present our laser marking systems to you in our demonstration facility and create free sample markings for you.
The laser marking systems of the Precision MS series are manufactured in Germany and are therefore subject to the highest quality requirements. Due to the individual production of the laser systems, you receive the right marking laser for your application and not a standard device from the production line.
The Windows software included in the scope of delivery is available for programming.
The delivery time is usually 8-12 weeks.
You are not sure whether a corresponding marking is suitable for your component?
Then use our free sample labelling service. We will create the desired marking directly on your components!
